Aquaterra Spas Newporter 3.0 22-jet, 5-person Spa for $2,199 from $3,000
Product Details
Included:
- Seating for 5
- 22 jets with stainless steel trim
- Thermal locking cover with hinge seal for added heat retention
- Full foam insulation for extreme energy efficiency
- Intuitive and simple digital control panel
- Whirlpool jet
- Underwater, multi-color LED light
- Bottom drain for easy maintenance
Finally – a spa that’s easy and affordable to own! The Newporter 3.0, by AquaTerra™ Spas is the perfect gathering spot to reconnect with family and friends or simply relax by yourself. Its Plug-N-Play technology makes set up a breeze. Simply fill it up with a garden hose and plug it into any standard 110v outlet. No expensive or custom wiring is required.
With curbside delivery and plug-n-play technology, owning the Newporter 3.0 couldn’t be any easier:
- Use a furniture dolly and a few friends to set the spa in the desired location
- Fill the spa with a garden hose
- Plug it into any nearby outlet
Once the water reaches the desired temperature, you’re ready to start enjoying your new spa!
Dimensions: 78” Round x 34”
Jet Count: 22 jets with stainless steel trim
Jet Pump: 1.5 BHP (1HP) 2-speed
Water Capacity: 265 USG
Dry Weight: 359 lbs.
Filled Weight: 2, 569 lbs.
Cabinet: Made of durable RokSolid™ advanced unicast polyethylene
Color: Gray cabinet with Taupe shell
Heater: 1kW (110V) / 4kW (230V)
Electrical: 110V plugs into a standard outlet or 230V conversion (licensed electrician can supply the GFCI, conduit and wires to convert)
Filter: 50 sq. ft. filtration with customized programming for optimized filtration cycles
Full foam insulation for maximum efficiency and long-term heat retention
Cover: high quality ASTM approved cover with insulating baffles and locking safety clips in gray to match your spa
15′ GFCI power cord (3′ are under the spa).
Steps are included with this model.
AquaTerra Spas are extremely energy efficient, so there is no need to turn the temperature down while not in use. Full foam insulation and a locking thermal cover will keep the heat in and the electric bill low, so you can enjoy your new spa for years to come.
AquaTerra Spas exceed the stringent California Energy Commission mandates for hot tub energy consumption
What comes with the spa? What else is needed?
The Newporter 3.0 comes with a matching cover. Aquaterra Spas do not come with chemicals. There are several chemical and step options available to purchase online.
Should the spa be turned off when not in use?
No. AquaTerra Spas are designed to be left on, at the desired temperature, all the time. The full foam insulation and thermal cover will keep the water hot with minimal energy consumption. This means the spa is always on and ready, whenever you are.
Can the spa be delivered to the backyard or deck?
No. The spa is only delivered to the curbside in front of the driveway. Check the local service directory to find a moving service or contractor to assist moving the spa if needed.
What type of foundation is required for the spa?
Your new spa needs a good solid foundation. The area your spa sits on must be able to support the spa, the water in it and those who use it. If the foundation is inadequate, it may shift or settle after the spa is in place, causing stress to the shell or components. Please refer to the spas’s owner’s manual for additional information.
Do I need any specialty wiring or plumbing?
No. The Newporter 3.0 can be plugged into any standard outlet (110 volt, 15 amp, dedicated outlet). No additional wiring or plumbing is required.
Who do I contact for assistance?
Please call our Customer Service department at (888) 961-7727, or email us at ahsservice@watkinsmfg.com.
What is the AquaTerra Spas warranty?
The manufacturer’s warranty covers the following areas: 5-year structure, 2-year cabinet, 1-year parts, 1-year labor, 1-year spa cover.